Careers / Embedded Firmware & RF Engineer

Vacancy

Embedded Firmware & RF Engineer

Weert, the Netherlands · full-time (32–40 hours, by agreement) · mainly on site (lab and field)

About Staal Instruments

Staal Instruments designs and manufactures wireless radar sensors in Weert, the Netherlands, that measure water levels in sewers, pumping stations and open water. Our MaxSHIFT60 sensors measure with mmWave radar, run for years on a single battery and send their data over the mobile network to our platform. They are used by water authorities, municipalities and Rijkswaterstaat, and by network operators in 22 countries.

We are developing the next generation of this instrument. It must measure more often and more intelligently, while still lasting at least five years on its battery. Every microjoule counts, and every reading must state how reliable it is. We are looking for someone to turn firmware, radio and energy into a single design.

What you will do

You will own the firmware and RF behaviour of the new instrument, together with our CEO, who designed the sensor architecture. You will work closely with the ML engineer who processes the data: what the models need and what the battery allows shape each other.

  • Develop and optimise low-power firmware on the new electronics board: measurement control, radar signal processing, power management and communication.
  • Measure and account for energy consumption, in the lab (including temperature cycling) and in real sewer manholes.
  • Extract features from the radar signal that indicate the quality of each reading, and calibrate them against reference measurements in our test rig.
  • Help build a pre-series and the calibration procedure every instrument goes through before it leaves our premises.
  • Verify radio performance at field installations, using cellular IoT networks (LTE-M/NB-IoT) under cast-iron manhole covers.
  • Prepare the product for series production at a contract manufacturer, including a second source for critical components.
  • Guide conformity testing (RED, EMC, ingress protection) and set up secure remote firmware updates and vulnerability handling with the Cyber Resilience Act in mind.

What you bring

Required

  • A bachelor’s or master’s degree in electrical engineering, embedded systems, applied physics or a related field.
  • At least 4 years of experience with embedded C/C++ on low-power microcontrollers, with or without an RTOS.
  • Experience measuring and reducing energy consumption in battery-powered devices.
  • Knowledge of digital signal processing (for example FFT, filtering, peak detection).
  • You work independently with lab equipment such as an oscilloscope, power analyser and logic analyser.
  • You are happy to work in the field regularly, in the Netherlands and occasionally abroad. A driving licence (category B) is required for this.

Nice to have

  • Experience with FMCW or other mmWave radar.
  • Experience with cellular IoT modems (LTE-M/NB-IoT) and antenna integration.
  • Experience with CE marking, RED and EMC testing.
  • Python for test automation and data analysis.
  • Knowledge of secure boot and over-the-air updates.

What we offer

  • A key role in a small team (currently five people): your design decisions will end up in thousands of instruments.
  • A product already in the field, with years of real measurement data to test against.
  • A competitive salary, depending on experience, plus 8% holiday allowance.
  • Flexible working hours, within what lab and field work allow.
  • A one-year contract with the prospect of a permanent position.

How to apply

Send your CV and a short motivation to info@staalinstruments.com. Questions about the role? Call Bart Willems on +31 85 744 1493. We aim to respond within two weeks. We warmly encourage candidates of all backgrounds to apply. No recruitment agencies, please.

At a glance

LocationWeert, the Netherlands
HoursFull-time (32–40 hours, by agreement)
WorkplaceMainly on site (lab and field)
ContractOne year, with the prospect of a permanent position

Interested?

Send your CV and a short motivation to info@staalinstruments.com.

Questions about the role? Call Bart Willems on +31 85 744 1493.